Industrial Rigging Equipment Supply in Ottawa and Eastern Ontario
What Is Industrial Rigging Equipment and Why Does Proper Selection Matter for Every Lift?
Rigging is the connection between your crane and your load. Every component in that connection, from the sling that wraps the load to the hook that attaches to the hoist, carries a fraction of the total risk of every lift your team performs. When any one of those components is wrong for the application, undersized for the load, worn beyond its service life, or used at an angle that exceeds its rated capacity, the consequences can be severe.
Boulanger Industrial Group, based in Limoges, Ontario, supplies a comprehensive range of industrial rigging equipment to manufacturing facilities, construction contractors, maintenance teams, and infrastructure operators across Ottawa, Eastern Ontario, and the Ottawa Valley. Our inventory includes slings, chains, hooks, shackles, clamps, hoists, trolleys, and the associated hardware needed to rig a safe lift for a wide range of industrial applications and load types.
​
Not sure what you need? Tell us what you are lifting, how often, and under what conditions, and our team will specify the ideal rigging configuration to keep your operation safe, efficient, and compliant with applicable Canadian standards.
Why Getting Rigging Right the First Time Protects Your People, Your Load and Your Operation
Rigging failures are not random. They are almost always traceable to a component that was wrong for the application, a rating that was exceeded, or a piece of hardware that should have been taken out of service before the lift took place. The right rigging equipment, properly selected and maintained, eliminates these failure modes before they become incidents.
Working with Boulanger Industrial Group to specify and source your rigging equipment is the right call when:
-
You are lifting loads with irregular shapes, off-center gravity, or surface conditions that require a specific sling type, material, or rigging configuration to distribute weight safely.
-
Your existing rigging inventory has components that are worn, damaged, or approaching the end of their inspection cycle and needs to be assessed and replaced before the next lift.
-
A new application or piece of equipment has introduced a load type or lifting geometry that your current rigging inventory was not designed to handle.
-
You need a custom rigging assembly built to a specific working load limit, length, or configuration that standard off-the-shelf components cannot provide.
-
Your team needs guidance on selecting the right combination of slings, hardware, and below-the-hook devices to build a compliant, application-specific rigging system.
The Rigging Equipment We Supply and How We Help You Build the Right Lifting Assembly
Slings - Synthetic, Chain and Wire Rope for Every Application
Slings are the most application-specific component in any rigging assembly. The wrong sling material or configuration for the load type, surface condition, temperature, or lift geometry can reduce the effective working load of the entire assembly below what the lift demands.
Boulanger Industrial Group supplies synthetic web slings, round slings, chain slings, and wire rope slings across a full range of lengths, widths, grades, and load ratings. Synthetic slings offer flexibility and load surface protection for finished or delicate materials. Chain slings provide durability and heat resistance for demanding industrial environments. Wire rope slings deliver high strength-to-weight ratios for heavy structural and industrial lifts. Our team will help you match the right sling type and configuration to your specific load and lifting conditions, including the correct angle factor for multi-leg assemblies.
​
Hardware - Hooks, Shackles, Clamps, Trolleys and Below-the-Hook Devices
​
Boulanger Industrial Group supplies a full range of rigging hardware including hooks, shackles, beam clamps, trolleys, and below-the-hook lifting devices. Every hardware component we supply is rated, marked with its working load limit, and sourced from manufacturers whose products meet applicable Canadian and international standards. Whether you need a standard hook and shackle combination for a routine overhead lift or a specialty beam clamp for a non-standard runway attachment, our team will confirm the right product for your load rating and application requirements.
Custom Rigging Configurations Built to Your Exact Application
Not every lift fits a standard rigging assembly. Custom load shapes, restricted access points, multi-point lift requirements, and unusual load geometries often demand a rigging configuration that has to be specified and assembled from components selected specifically for the job.
Boulanger Industrial Group works with clients across Ottawa and Eastern Ontario to design and supply custom rigging solutions for non-standard applications. Tell us the load weight, the lift geometry, the access conditions, the frequency of use, and the environment the rigging will operate in, and our team will build a specification that gives you a safe, compliant rigging assembly configured precisely for the way you work.
Rigging Equipment Sourced from Leading Industrial Manufacturers
Every sling, hook, chain, shackle, and below-the-hook device we supply is sourced from established industrial manufacturers whose products are built and tested to meet the working load limit ratings and compliance standards your operation depends on. We do not supply off-grade rigging hardware, and we do not recommend components we would not trust on our own lifts.
Quality rigging starts with quality supply. Let us specify the right components for your next lift.
Custom Rigging Solutions for Non-Standard Loads and Lifting Conditions
When a standard sling or hardware combination will not safely handle your load, Boulanger Industrial Group builds a custom rigging specification around your exact application. We account for load weight, center of gravity, lift angles, surface conditions, frequency of use, and environmental factors to deliver a rigging assembly that performs safely every time it is used.
We serve facilities across Ottawa, Hawkesbury, Cornwall, Casselman, Embrun, and throughout Eastern Ontario with custom rigging supply and specification services.
Rigging Supply Backed by Crane and Lifting System Expertise
Sourcing rigging from a supplier who also services and installs overhead crane systems means you are getting component recommendations from people who understand the full lifting system, not just the individual part.
Boulanger Industrial Group's team brings crane system knowledge to every rigging conversation, helping you avoid mismatches between your hoist, your runway, your hook, and your sling assembly.
That system-level understanding is what makes the difference between a rigging spec that works and one that creates problems on the floor.